EPOXY COVING

EPOXY COVING

SOLVENT FREE EPOXY PRIMER

EPOXY PRIMER is a two part 100% solid epoxy resin priming system

ADVANTAGES

  •  It has low viscosity with maximum penetration, soaking into the capillary pores.
  •  It also strengthens the top layer of substrate.
  •  It has excellent adhesion to metal and concrete substrate
  • It is compatible with subsequent Epoxy and Polyurethane Top Coats.
     
     

METHOD OF APPLICATION

FLOORING system should be installed by approved contractors. Following information should be used as a guideline

1. SURFACE PREPARATION.

The long-term durability of the applied Epoxy PRINIER is dependent on the adhesive bond achieved between the flooring material and substrate. It is most important therefore, that substrate surfaces are correctly prepared prior to application.

  •  New concrete or cementitious substrates should have been placed at least 28 days and have a moisture content of less than 5% before topping with EPOXY PRIMER
  •  Before application, the surface to be coated, should be free from loose particles, rust, oils, grease, or earlier coatings and should be thoroughly dry.
  •  After surface is dry, all repair work like sealing of joints, crack filling of cavities and crevices should be carried out.
  •  If the surface is tremix or smooth surface then Shot Blasting is carried out to make the surface rough in order to enhance the bonding of the primer

2. MIXING

Pack components are pre-weighed for optimum performance. Never split packs. Empty contents of Base into a mixing container and pre-mix to assure the suspension of solids. Add Curing Agent and continue to mix to a uniform consistency for 1-2 minutes. Mix with slow speed drill and helical spinner head for 2 minutes.

3. APPLICATION

EPOXY PRIMER must be applied immediately after mixing the two components. EPOXY PRIMER is applied with a paint brush or roller to produce a thin film.

Disclaimer :- The Company’s Products are sold subject to the Company‘s Standard Terms and Conditions of Sale. Products are warranted against defective materials and workmanship. The Company makes every effort to ensure that all the information, recommendations or the specifications provided by it are accurate and true. However as the Company has no control over the conditions of use, it cannot accept any liability, either directly or indirectly regarding the usage of its products. Product specifications are subject to change without prior intimation to users as the products are being continuously upgraded.

Worldwide Exports Location

Following Countries: Afghanistan, Albania, Algeria, Andorra, Angola, Antigua And Barbuda,,Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia And Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burundi, Cabo Verde, Cambodia, Cameroon, Canada, Central African Republic (CAR), Chad, Chile, Colombia, Comoros, Democratic Republic Of The Congo, Republic Of The Congo, Costa Rica, Cote D’Ivoire, Croatia, Cuba, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kosovo, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macedonia (FYROM), Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Myanmar (Burma), Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, Niger, Nigeria, North Korea, Norway, Oman, Pakistan, Palau, Palestine, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Rwanda, Saint Kitts And Nevis, Saint Lucia, Saint Vincent And The Grenadines, Samoa, San Marino, Sao Tome And Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tonga, Trinidad And Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates (UAE), United Kingdom (UK), United States Of America (USA), Uruguay, Uzbekistan, Vanuatu, Vatican City (Holy See), Venezuela, Vietnam, Yemen, Zambia, Zimbabwe.

India Location

Arunachal Pradesh, Patan, Kota, Chandighar, Pune, Tinsukia, Gaya, Ajmer, Ludhiana, Solapur, Dibrugarh, Bihar, Udaipur, Bathinda, Kolhapur, Jorhat, Varanasi, Jodhpur, Moga, Chennai, Assam, Prayagraj, Bikaner, Jalandhar, Puducherry Guwahati, Gorakhpur, Rajasthan, Gurdaspur, Maduari, Nagaland, Kanpur, Bareilly, Pathankot, Thiruvananthapuram, Manipur, Lucknow, Agra, Amritsar, Tamil Nadu, Tripura, Odisha, Jaipur, Jammu, Imphal Meghalaya, Bhubaneswar, Moradabad, Srinagar, Mizoram, Sikkim, Puri, Haldwani, Palampur, Kohima, Siliguri, Brahmapur, Naintal, Himachal Pradesh, Shillong, Kolkata, Chhattisgarh, Haridwar, Punjab, Noida West Bengal, Raipur, Gurugram, Haryana, Dhanbad, Bhilai, Delhi, Bhopal, Jamshedpur, Visakhapatnam, Hisar, Indore, Ranchi, Vijayawada, Karnal, Rajkot, Jharkhand, Kakinada, Panipat, Vadodara, Maharashtra, Telangana, Sonipat, Ahmedabad, Mumbai Gwalior, Ambala, Nagpur In India,